Chargers & Dischargers

Tired of charging one battery at a time? Try the PowerPal 4! This charger allows you to plug 4 batteries into one charger simultaneously, and it will intelligently and automatically charge all 4 of them at once to their maximum capacity. To top it off, the batteries being charged do not even need to have the same configuration. You can connect different types Ni-MH/Ni-CD/LiPo/LiFe batteries into any of the charging ports. No more staying up late for charging batteries.

PowerPal 4 employs the circuit that has maximum output power of 200W. As a result it can charge or discharge 15 cells of NiCd/NiMH at 5.0A and 8 series of Lithium Batteries with maximum current of 5.0A. Furthermore the cooling system is so efficient that can hold such a power without any trouble of running the CPU or the operating program.
It can store data for 5 different batteries per charger (20 in total) Input power monitoring when using a 12v car battery source will avoid damage to battery by ending charging automatically if voltage drops below the required limit.

* Operating voltage range - DC 11-15V
* Power Source - 12V DC (recommended 20-30A 12V Power Supply)
* Charge Power - 50Watts, current is regulated accordingly (e.g. 11.1V battery, charge current approx. 4.5A)
* Discharge Power - 5 watts, current is regulated accordingly
* Cell Count - 1-15 NiCd/NiMH cells, 1-6 LiPo/LiIon/LiFe cells, 1-10 Lead acid (2-20V)
* Current Drain for balancing lithium - 300mA
* Charger Dimensions - 225.4 x 158.6 x 62.4mm
* Net Weight - 1.09kg

Etronix adds a new DC Power Pal to their line up. Small and compact this 12v DC features, microprocessor controlled high performance charger/discharger/cycler for NiCd/NiMH/Lithium/Pb batteries with an integrated cell voltage balancer.
Input 12v DC, temperature sensor option and integrated Lithium battery balancer.
Charge current up to 5A, discharge current up to 1A, 1 to 6 series of Lilo/LiPo/LiFe, 1 to 15 cells of NiCd/NiMH, 2 to 20v of Lead-acid (Pb)

* Battery Type: 1-6 Li-Po, Li-Ion, Li-Fe, 1-15 NiCd/NiMH, 1-6 Lead-Acid
* Charge Rate: 0.1A-5.0A (Max 50W)
* Discharge Rate: 0.1A-1A (Max 5W)
* Cycle: Charge/Discharge 1-5 Cycles
(charge>discharge, discharge>charge)
Balancer: Built-in individual voltage balancer for Lithium batteries 300mAh/cell current drain
* Fast/Storage Mode Charge Lithium batteries for special purposes.
‘Fast’ reduces Charge time, while ‘Storage’ controls final voltage for long time storage
* Charge Safety: Delta Peak Sensitivity voltage detection (NiCd/NiMH), Auto-Charge current limit useful for small capacity NiMH, Capacity limit charge, Temp limit charge (option), Time limit charge
* Battery Data 5 model memory

* Charge leads for Receiver batteries
* Charge leads for Receiver batteries JST plug
* Glow stick
* Deans connector
* Crocodile Universal clip
* JST XH Balance Board

The NX81 is the perfect charger to finish off those RTR electric car with no charger. For those who don't want the hassle of carrying a separate power supply and 12V charger. It's easy use interface is ideal for begginers whilst also providing them with a good range of charging rates for 5 different pack sizes (4,5,6,7 and 8 cells)

- Ni-Cd/Ni-MH - 4~8 Cells
- Charge Rate Selectable - 0.5A, 1A, 2A, 3.5A & 5A
- Charge Status - LED
- AC Input - 110~240V AC
- Futaba TX, JR/Spektrum TX, RX and Tamiya charge leads included
- 4mm Sprint Clip Connection
- Delta Peak

This Charger is perfect for a car using 2 batteries as you can have both charging at the same time which saves on the cost of 2 separate chargers or the time of charging one and then the other. Although can also be used for a car using just the one pack. Each channel operates on a separate circuit so no waiting for the other before you can get going.

* Ni-Cd/Ni-MH - 2 x 6~8 Cells
* Output - 2 x 5.0A (Pulsed)
* Charge Status - 2 x LED
* AC Input - 110~240V AC
* 2 x Tamiya charge leads included
* 2 x 4mm Sprint Clip Connection

* Designed specifically to charge 1~4 cell Lithium Polymer (Li-Po) batteries
* Reverse polarity protection on both DC input and output
* Display Type: Blue LED: 1~3 Cell - Auto Selection / Red LED: 4 Cell - Manual selection
* Microprocessor controlled charging system
* System Protection
o No battery connected
o Reverse polarity of output
o Wrong cell quantity selected
o Voltage error
o Input Voltage error
o Circuitry problem
* Output connection 4mm socket

* Input Voltage: 11~15V DC / 100~240V AC
* Battery Type & Cells: Lithium Polymer (Li-Po): 3.7v type ONLY / 1~3 Cell - Auto Cell Detection / 4 Cell - Manual Selection
* Charge Rate: Automatic
o 1~2 Cell packs 3.0 Amp max
o 3 Cell packs 2.4 Amp max
o 4 Cell packs 1.8 Amp max (Max 30W)
* Charge Termination: Constant current / Constant voltage

* The LCD readout shows the charge progress in voltage, current, capacity and time
* Short circuit Protection
* Automatic safety cut-off after 90 minutes
* Reverse Polarity Protection on both Input and Output
* Size: 145 w x 135 L x 55 H (mm)
* Weight: 450g (without leads)
* Tamiya type charge lead included

* Input Voltage: 110~240V Mains 11~15V DC
* Battery Type & Cells: 4~8 NiCd/NiMH (4.8V~9.6V)
* Charge Rate (Fast): 0.8A, 1.5A, 3A & 5A User Selectable (Max 40W)
* Charge Rate (Trickle): Automatic
* Charge Termination: Delta Peak NiCd 8mV/cell NiMh 5mV/cell

* 2 - line, 16 character, blue backlit, LCD makes the screen extremely clear and legible
* Built-in intelligent balancing circuit is designed to individually balance each cell on the connected lithium battery pack within the tolerance of 5mV during charge or discharge
* Balancing plug adaptor boards are supplied to suit JST XH, FlightPower and Thunder Power batteries. Optional adaptors for Polyquest are available
* Voltage monitoring feature shows each actual cell voltage on the screen during balancing
* Various warning messages for incorrect input voltage, wrong connections, unsuitable battery condition and reverse polarity on output

* Input Voltage: 11~15V DC
* Battery Type & Cells: 1~5 Li-Po, Li-Ion, Li-Fe / 1~14 NiCd, NiMH / 1~6 Lead Acid cells
* Battery Capacity 100mAh ~ 6000mAh adjustable ONLY for Li-Po, Li-Ion, Li-Fe
* Charge Rate: 0.1A ~ 6A Adjustable in 100mA steps (max 50W)
* Trickle Charge Rate: 0 ~ 200mA
* Balancing Max. Current: 280mA (Tolerance 5mV during charge)
* Charge Termination 'Zero Delta V' peak detection for NiCd/NiMH 'Constant current/constant voltage' for Li-Ion/Po Li-Fe and Pb
* Delta Peak Sensitivity: 5mV ~ 25mV for NiCd & 3mV ~ 25mV for NiMH (per cell)

The new Pro-Peak Taurus is an innovative multi function charger far superior to existing conventional chargers. This unit is especially designed to maximize charge efficiency using its own unique algorithm. The integral 2 line, 16 character LCD screen displays various information relating to the operating modes and adjustment parameters, as well as key functions – such as the battery charge state, which shows the percentage of capacity remaining.Taurus is very user friendly – even for beginners – thanks to its 2 automatic and 10 intelligent selectable 'battery parameter' manual memories.
The manual 10 memories, containing factory pre-set battery parameters, can be re-programmed to store your own standard battery pack parameters so that you can obtain the same precise results whenever you charge.

- 1~30 Cell Ni-Cd/Ni-MH
- 1~12 Cell Li-Ion/Li-Po/Li-Fe
- 1~6 Cell Lead-Acid
- Charge Current: 0.1-10A
- Discharge Current: 0.1-10A
- 2 Automatic Memories
- 10 User Selectable Memories
- Zero Current Voltage Check
- Suitable for operation with a 12v Lead-Acid (Pb) battery or 10-15v DC Power Supply

The Prolux Pro-LB6 is a perfect field charger & discharger for any enthusiast. With it's vast range of charging capabilities and rates it's suited to any type of modelling from planes, helis and cars.

* Super function 5 in 1,16-bit microchip CPU controller.
* Built-in system temperature detection protection with additional battery temperature sensor option ( extra option item no.2714)
* DC input only and could set low voltage 11V.Under 11 V, it will stop working.
* Built-in Li-Po / LiFePo balance charging with requested connectors
* Automatic accidental battery inversion detection and reverse input protection.
* Memory function for charging and discharging parameters.
* All-aluminum streamline casing design-tough, compact and portable.
* Large Two-line, 16 characters dot matrix LCD display.
* Banana plug, it's very convenient for using.
* 10 tone selectable beep function with volume control.
* Built-in DC cooling fan.

* Input: DC 11-18V
* Battery Type: Ni-Cd / Ni-MH / Li-Po / LiFePo / Pb
* Battery Cell:
Ni-Cd / Ni-MH : 1-14 Cell packs (1.2-16.8V)
Li-Po : 1-6 Cell packs (3.7 -22.2V)
LiFePo : 1-6 Cell packs (3.2-19.2V)
Pb : 2V, 6V, 12V
* Charge Rate: 0.1A - 5.0A (0.1A Per gradation)
* Discharge Rate: 0.1A - 2.0A (0.1A Per gradation)
* Charging Capacity : 1- 9900mAH
* Safety Timer : 10 - 720 mins or OFF
* Trickle Charge Rate : 0.05 - 0.2A or OFF
* Peak Sensitivity (- delta V) : 0 - 15mV