Cars - Nitro

Introducing the refreshed HPI Bullet ST 3.0, the ready-built off-road vehicle that's ideal for all off-road bashers and enthusiasts! Now featuring a waterproof battery compartment, waterproof servos and rain cover for the air filter, the Bullet 3.0 is now truly a go-anywhere machine!

This Bullet is 1/10th scale stadium racing truck fitted with a powerful 4WD drivetrain and extra-powerful HPI Nitro Star G3.0 engine with 2.2 horsepower, so it can power through all sorts of terrain and fly over any obstacles! Now fitted with a versatile and comfortable HPI 2.4GHz radio system, it's easier than ever to control the speed of the Bullet!

The Bullet ST 3.0 is just one member of a family of HPI vehicles which are based around a durable 4WD shaft drivetrain, 2 shocks per wheel and double-deck aluminium chassis. The Bullet off-road trucks feature either Nitro Star 3.0 engines or silent Flux brushless motor systems, and are available in different off-road truck varieties. In short, you can get the precise flavour of off-road performance you want with the HPI Bullet!

Factory-assembled & pre-painted 4WD Stadium Truck
2.4 GHz radio system for crystal-free, comfortable control
Waterproof receiver/battery box
Waterproof steering and throttle servos
Covered air filter keeps water away from the air intake
Painted and detailed bodyshell ready to strut its stuff!
Strong and reliable Nitro Star G3.0 engine
Easy and simple pullstarter for instant action
Big 75cc fuel tank gives you plenty of runtime
6061 aluminium chassis provides the ideal backbone
Tough bumpers combine with skid plates to protect all 4 corners
8 oil-filled shocks provide a plush ride
Extra-long suspension arms provide stability and balance
Proven racing design throughout
Steel turnbuckle links allow you to custom-tune the ride
Sealed shaft drivetrain is maintenance-free and super strong
Double-pad slipper clutch design for extra drivetrain protection
Reliable disk brake with adjustable linkage
All-terrain tyres look fantastic on black chrome wheels
Intelligent fuel line routing to keep things neat and tidy
A smart metal washer prevents over-tightening of wheel nuts
Aluminium center brace for more durability over plastic brace
Additional track-tuning options included in the kit!

Length: 417mm
Width: 336mm
Height: 160mm (Adjustable)
Wheelbase: 272mm
Track: 263mm
Drivetrain: Shaft 4WD

Introducing the refreshed HPI Bullet MT 3.0, the ready-built off-road vehicle that's ideal for all off-road bashers and enthusiasts! Now featuring a waterproof battery compartment, waterproof servos and rain cover for the air filter, the Bullet 3.0 is now truly a go-anywhere machine!

This Bullet is 1/10th scale monster truck fitted with a powerful 4WD drivetrain and extra-powerful HPI Nitro Star G3.0 engine with 2.2 horsepower, so it can power through all sorts of terrain and fly over any obstacles! Now fitted with a versatile and comfortable HPI 2.4GHz radio system, it's easier than ever to control the speed of the Bullet!

The Bullet MT 3.0 is just one member of a family of HPI vehicles which are based around a durable 4WD shaft drivetrain, 2 shocks per wheel and double-deck aluminium chassis. The Bullet off-road trucks feature either Nitro Star 3.0 engines or silent Flux brushless motor systems, and are available in different off-road truck varieties. In short, you can get the precise flavour of off-road performance you want with the HPI Bullet!

Factory-assembled & pre-painted 4WD Monster Truck
2.4 GHz radio system for crystal-free, comfortable control
Waterproof receiver/battery box
Waterproof steering and throttle servos
Covered air filter keeps water away from the air intake
Painted and detailed bodyshell ready to strut its stuff!
Strong and reliable Nitro Star G3.0 engine
Easy and simple pullstarter for instant action
Big 75cc fuel tank gives you plenty of runtime
6061 aluminium chassis provides the ideal backbone
Tough bumpers combine with skid plates to protect all 4 corners
8 oil-filled shocks provide a plush ride
Extra-long suspension arms provide stability and balance
Proven racing design throughout
Steel turnbuckle links allow you to custom-tune the ride
Sealed shaft drivetrain is maintenance-free and super strong
Double-pad slipper clutch design for extra drivetrain protection
Reliable disk brake with adjustable linkage
All-terrain tyres look fantastic on black chrome wheels
Intelligent fuel line routing to keep things neat and tidy
A smart metal washer prevents over-tightening of wheel nuts
Aluminium center brace for more durability over plastic brace
Additional track-tuning options included in the kit!

Length: 417mm
Width: 336mm
Height: 160mm (Adjustable)
Wheelbase: 272mm
Track: 263mm
Drivetrain: Shaft 4WD

The excellent RTR Nitro RS4 3 Evo+ has been one of HPI's stand-out car kits, introducing many RC fans to the joys of Nitro RC driving. With the 2.2hp T3.0 engine you get an easy-to-use yet extremely powerful engine that's perfect for speed runs with your friends or racing at your local track! With the adjustable 2-speed transmission fitted, the car is perfectly suited for quick acceleration out of the corners as well as pure top-end speed! The full-time 4WD also gives you great acceleration, easy handling characteristics and traction on any type of paved surface.

Displacement: 3.01cc
Boar: 16.8mm
Stroke: 13.6mm
Power: 2.2hp @ 31,000 RPM
Maximum RPM: 32,000 RPM
Carburettor: F2-6.5 (Composite 6.5mm)

Length: 440mm
Width: 200mm
Height: 120mm (Adjustable)
Wheelbase: 258mm
Drivetrain: Shaft 4WD

The Firestorm 10T has been a staple of the HPI off-road line-up since its introduction, and now we've added our latest 2.4GHz radio system to make driving with your friends easier than ever! 2.4GHz technology is the ultimate in user-friendly radio control fun - no more searching for radio crystals or trying to find an open channel at the track! We've also tidied away everything underneath two amazing paint designs inspired by the wildest extreme sports, and then added 6-spoke chrome wheels to wrap up this amazing package!

The Trophy Truggy 4.6 is the perfect way to get into nitro 1/8 truggies! A 'truggy' is part truck with its big tyres and pick-up truck style bodyshell, and it's also part buggy with the main drivetrain components, chassis and suspension being taken directly from or derived from a 1/8th scale rallycross buggy chassis. Truggies are a popular racing class around the world! This kit has got everything you need for anything you want to do. For bashing fun and big-air stunts, it has a durable aluminium chassis, braces and shock towers, and for race track performance and tuning the Trophy is equipped with the amazingly powerful Nitro Star F4.6 HPI engine, angle-pin racing tyres, oil-filled shocks, turnbuckles and plenty of tuning adjustment possibilities.

* Monster 4.6cc (.28) engine size
* Bore: 18.68mm
* Stroke: 16.6mm
* Power: 2.9hp @ 32,000 RPM
* Carburettor: F1-7.5 (Composite 7.5mm)

* True ABC construction for long life
* Composite carb construction helps prevent heat vaporization of fuel
* Finned aluminium case
* Huge aluminium heatsink
* Tough pullstarter fitted standard
* 2-stage air filter for extra engine protection
* Splash cover over air filter keeps the engine from getting flooded with water in wet conditions

* Factory-assembled & pre-painted 4WD nitro racing truggy
* 2.4 GHz radio system for crystal-free, comfortable control
* Waterproof receiver/battery box protects battery and receiver from the elements
* Waterproof laydown steering servo for low CG and awesome handling
* Waterproof throttle/brake servo
* Covered air filter keeps water away from the air intake
* Low centre of gravity (CG) design for great track performance
* Strong and reliable Nitro Star F4.6 engine with 2.9hp
* Strong engine mount and large flywheel opening for starter boxes
* Easy and simple pullstarter for instant action
* 4mm 6061 aluminium chassis has angled sides for extra stiffness
* Thick 6061 aluminium shock towers are strong and durable
* Thick steering brace for increased chassis stiffness
* Low-profile aluminium radio tray securely mounts servos
* Race-tuned suspension design for awesome traction
* Extra-long, oi-filled shocks with aluminium shock bodies
* Multiple shock and camber link locations for extra race tuning
* Steel turnbuckle links allow you to custom-tune the ride
* Tough front bumper protects against crash damage
* Extra-large 160cc fuel tank gives you plenty of runtime
* Powerful, adjustable & vented front and rear steel disk brakes
* Strong fibre brake pads for longevity and fade resistance
* All-terrain Shredder Block angle pin tyres for grip and traction
* Intelligent fuel line routing to keep things neat and tidy
* Cast aluminium steering knuckles for increased strength
* 17mm hex hubs resist stripping out
* Slick racing truck bodyshell is prepainted and cut out for instant race looks
* Adjustable mounts for the wide racing wing
* Extra suspension mounts included for tuning options

The HPI Trophy range of off-road racers has been updated with the latest in 2.4GHz radio technology, waterproof servos and a waterproof receiver & battery compartment! That's right: one of our most popular nitro kits ever now has been upgraded to make it a performer just about anywhere!
The Trophy 3.5 buggy is the perfect way to get into nitro 1/8 buggies! Rallycross buggies are one of the biggest racing classes around the world, and it's still growing fast! This kit has got everything you need for anything you want to do. For bashing fun and big-air stunts, it has a durable aluminium chassis, braces and shock towers, and for race track performance and tuning the Trophy is equipped with a powerful race-legal Nitro Star F3.5 (.21 cubic inch) HPI engine, HB Proto design racing tyres, oil-filled shocks, turnbuckles and plenty of tuning adjustment possibilities.
In addition to being race-bred and ready for track action, the updated Trophy 3.5 looks great, too. The sleek aerodynamic racing bodyshell features a brand new paint design, and the HB Proto tyres are wrapped around cool black chrome Edge 7-spoke wheels. The rear wing isn't just for looks, either - it gives the Trophy loads of downforce and control in the air. To top everything off, we've updated the anodizing of the shock caps, wheel nuts and more to HPI-spec bright orange!

* Factory-assembled & pre-painted 4WD nitro racing buggy
* 2.4 GHz radio system for crystal-free, comfortable control
* Waterproof receiver/battery box protects battery and receiver from the elements
* Waterproof laydown steering servo for low CG and awesome handling
* Waterproof throttle/brake servo
* Covered air filter keeps water away from the air intake
* Low centre of gravity (CG) design for great track performance
* Strong and reliable Nitro Star F3.5 engine with 2.5hp
* Strong engine mount and large flywheel opening for starter boxes
* Easy and simple pullstarter for instant action
* 4mm 6061 aluminium chassis has angled sides for extra stiffness
* Thick 6061 aluminium shock towers are strong and durable
* Thick steering brace for increased chassis stiffness
* Low-profile aluminium radio tray securely mounts servos
* Race-tuned suspension design for awesome traction
* Extra-long, oi-filled shocks with aluminium shock bodies
* Multiple shock and camber link locations for extra race tuning
* Steel turnbuckle links allow you to custom-tune the ride
* Tough front bumper protects against crash damage
* Extra-large 160cc fuel tank gives you plenty of runtime
* Powerful, adjustable & vented front and rear steel disk brakes
* Strong fibre brake pads for longevity and fade resistance
* HB Proto tyres look fantastic on black chrome wheels
* Intelligent fuel line routing to keep things neat and tidy
* Cast aluminium steering knuckles for increased strength
* 17mm hex hubs resist stripping out and are hollow for light weight
* Slick racing bodyshell is prepainted and cut out for instant race looks
* Adjustable mounts for the wide racing wing
* Extra suspension mounts included for tuning options

Length: 518mm
Width: 300mm
Height: 180mm
Track: 280mm
Wheelbase: 333mm
Drivetrain: Shaft 4WD

For years the Hyper 7 TQ has been the leading ready-to-run 1/8th off road buggy in the World. Building on its success and popularity they have made some subtle design enhancements in key areas to further improve performance and reliability. The new Hyper 7.5 Ready-To-Run buggy promises to maintain the Hyper legacy at the very top of the RTR category.

* Ready-To-Run with 3-channel HoBao 2.4ghz radio system installed
* New lightweight aluminium front and rear shock towers
* New improved front top arms
* New improved servo saver & steering assembly
* New 20mm Super Big bore threaded shocks
* New high downforce rear wing
* New gear ratio
* New paint scheme bodyshell
* Hyper 21 3-port RACE Pull Start engine

The Firestorm 10T has been a staple of the HPI off-road line-up since its introduction, and now we've added our latest 2.4GHz radio system to make driving with your friends easier than ever! 2.4GHz technology is the ultimate in user-friendly radio control fun - no more searching for radio crystals or trying to find an open channel at the track! We've also tidied away everything underneath two amazing paint designs inspired by the wildest extreme sports, and then added 6-spoke chrome wheels to wrap up this amazing package!

* Nitro Star T3.0 engine with true ABC construction for extreme power and easy tuning
* Low-profile 75cc fuel tank for a lower centre of gravity
* 3mm aluminium plate main chassis is lightweight and durable
* Steel centre chassis brace keeps the spur gear and clutch bellmesh consistent, even in hard landings
* Race-tuned suspension geometry and components
* Nimble handling and easy to drive in all conditions
* Existing Firestorm option parts bolt directly on to maximize performance
* Vertically adjustable front and rear camber links are easily adjustable to suit conditions and driving styles
* Adjustable shock positions (3 upper and 2 lower) to maximize suspension performance
* Adjustable wheelbase to tune the length of the truck to suit driving conditions
* Adjustable rear toe and anti-squat for quick adjustment to fine tune handling
* Dual pad slipper clutch protects the drive train on hard landings
* Sealed planetary gear differential for nearly zero maintenance, maximum reliability and convenience of tuning differential action with heavy weight silicone oils
* Strong alloy steel dog bones for simplicity and durability
* Fibre brake disk with piston actuation for strong, smooth braking
* Ball bearings throughout the drive train for maximum speed and efficiency
* Pre-painted body with custom silkscreen graphics

* Length: 425mm
* Front Width: 325mm
* Rear Width: 325mm
* Weight: 2.04kg
* Wheelbase: Adjustable

RB have combined their many years of experience in manufacturing high quality RC racing products, into one finely tuned high performance RTR car.The RB ONE.

* Modern and compact platform
* Anodized « V type » chassis (Also folded at the back to avoid tailgating on jumps)
* Front and back chassis frame
* Last generation geometry, adjustable, modern and efficient.
* Servo saver mounted on bearings (4) and adjustable hardness.
* Adjustable servo saver plate
* Fully equipped with reversible threaded track rods.
* Adjustable front and rear anti-roll bar
* Big shocks with real bellows
* Transmission 100% on bearings
* CVD drive shafts with bellows
* Steel central spur gear
* Transmission with bevel gear
* 3 differential with conical gears
* Adjustable braking powe
* Adjustable braking balance front/rear
* Monoblock engine mount
* Aluminum center diff mount
* 100% Allen type screws
* In-line throttle/brake linkage system
* Low profile and pre oiled double foam air filter
* 3 shoe clutch (with carbon shoes)
* Anti splash fuel tank with integrated filter
* Adjustable wing with aerodynamic diffuser
* Black/chrome rims
* Closed wheel nuts
* Long life tires with inserts

* Transmitter/receiver 2.4GHz technology
* High quality Savox servos used for superior performance
* Metal geared ball bearing steering servo
* Receiver battery pack
* Charger

* RB high performance 3.5cc engine with serial number
* Strengthened crankcase with additional cooling fins and anti front bearing leaking system.
* Machined piston with tuned 3 ports + 2 by pass sleeve.
* Lightened racing conrod
* Turbo combustion chamber and turbo plug
* Black cooling head providing a perfect cooling
* 14mm tuned crankshaft
* Composite cage bearings
* Aluminum/Nylon anti vapor lock carburetor
* In-line exhaust pipe and manifold

After much development work, HoBao and CML Distribution are pleased to release the new HyperStar UK Edition 1/8th Off Road buggy. The new HyperStar successfully tested and run throughout the winter months by team drivers, comes race ready for UK style grass and astro turf venues. Subtle changes to the general specification make the UK Edition more suited to UK tracks and venues over the worldwide version.

The all-new front pivot ball suspension is far more forgiving through bumps and during cornering, allowing drivers to push harder and faster than before without mistakes. Caster adjustment can be made quick and simply with space adjustment, while roll bars have been updated front and rear. Suspension mounts feature improved toe-in adjustment inserts and plates for better reliability.

* New pivot ball front suspension
* Standard diffs front, middle, back
* PSM upright engine mounts
* Milled lightweight hard coated chassis
* Separate rear wing mount
* High downforce wing
* Improved radio tray
* 20mm Big bore shocks
* Aluminium shock caps
* Centre universal driveshafts
* Front and rear universal driveshafts
* Ceramic disc brakes
* Brake splash covers
* New radio box
* CNC machined aluminium hard coated towers
* Hyper 9 GL +4mm hard coated chassis

Requires, wheels, tyres, electronics, engine & pipe to complete

Team Losi Racing has taken the most innovative, revolutionary 1/8-scale buggy design in racing history one step further. The 1/8-scale 8IGHT 2.0 European Spec Buggy Kit provides racers with a ground-breaking kit that is optimized specifically for European-style track setups. Using track-tested tuning setups from top European nitro racers, as well as newly engineered features and design elements aimed at the European market, the 8IGHT 2.0 EU Buggy Kit is professionally dialed and ready for assembly.

* Aluminum inclined king pin spindle and carriers
* 46T spur gear with 13T clutch bell
* 4mm rod ends and turnbuckles
* European rear shock tower with laid down shock positions and additional camber locations that allow camber gain tuning
* Heavy-duty European front shock tower with additional laid down shock mounting locations
* EFRA fuel tank kit included - Installed by consumer
* Black, hard-anodized front adjustable hinge pin braces
* Black, hard-anodized adjustable hinge pin braces with 16 adjustment cams
* Black, hard-anodized wheel hexes and covered wheel nuts
* 15mm vented shock caps and foam bladder compensators
* Metal servo inserts for steering and throttle
* Left hand-screws included for left rear and right front of buggy
* Aluminum flywheel with two plastic clutch shoes and two aluminum shoes
* Laser-etched chassis with European Spec logo
* Redesigned 8IGHT 2.0 European-style body
* US hex tool kit included
* Includes a multi-lingual manual in English, French, German, Italian and Spanish
* Wheels, tires and inserts are not included

Type:European Spec Nitro Buggy Kit

Scale:1/8

Length:497mm

Width:308mm

Wheelbase:323-327mm

Weight:Varies with equipment used

Kit/RTR:Kit

Body:Clear, European-style buggy body

- New chassis to accomodate all new drivetrain parts
- New and improved handling
- New suspension geometry with multi-adjustable roll centers
- New improved weight balance with more centrally-positioned rotary moment
- New diff bulkheads to accomodate new drivetrain parts
- New central drivetrain system
- New central CVD drive shafts
- New pinion gears
- New diff ball-bearings
- New better-sealing shock O–rings
- New rear brace to accomodate new central drive shafts
- New front and rear alu suspension holders with eccentric roll centers
- New composite eccentric bushings
- New more robust suspension pins
- New high-downforce body
- New graphite radio plate more securely placed between throttle servo and spur gear
- New updated radio box

- premium high-competition off-road buggy
- efficient Zero Kingpin suspension
- lightweight & strong composite steering blocks with molded-in steel bushings
- well-proven 808 suspension parts and geometry
- ultra-low CG, all parts centralized in chassis
- optimized front/rear and left/right weight balance for perfect jumping
- pure racing design, highest performance, ultra-durable parts
- ultra-lightweight, high-tensile transmission parts hand-made from special world-renowned top-secret self-developed HUDY Spring Steel™
- drivetrain includes 22 high-speed rubber-sealed bearings for maximum efficiency and speed
- ultra-precision front/rear and center diffs with HUDY Spring Steel™ outdrives
- pinions, spurs, crown gears and clutchbell manufactured by HUDY
- optimized multiple upper/lower shock mounting locations for front and rear
- steel brake disks for ultra-efficient, fade-free braking
- high-grip brake pads
- exclusive adjustable turnbuckles from HUDY Spring Steel
- small profile steering blocks with molded-in steel bushings and ultra-light caster blocks
- high-tensile Swiss 7075 T6 hard-anodized chassis
- ultra-strong inboard & outboard suspension pivot pins
- front & rear anti-roll bars
- centralized engine positioning
- narrow servo saver and steering system
- ultra-short graphite steering plate
- front & rear flexible composite brace
- gearboxes with Labyrinth Dust Covers
- clutchbell with oversized ball-bearings
- premium-grade graphite shock towers: 4mm extra-thick front, 3.5mm thick rear
- big-bore oversized shocks for excellent handling on bumpy tracks and big jumps
- threaded big-bore hard-anodized shock bodies
- protective rubber folding shock boots for big-bore shocks, front & rear
- super-low profile foam air filter with redesigned rubber elbow
- larger-capacity fuel tank with capacity-adjustment inserts
- fuel line holders mounted directly on fuel tank
- fuel tank pressure cap with 1-piece profiled seal for perfect fitment
- reinforced composite ball joints
- ultra-low XRAY racing body
- XRAY Premium Shock Oils for perfect consistency

Now you can fire up your truck in minutes with the new updated RTR Pirate Sport Monster from Hobao. This high quality truck, features everything you come to expect in a supersize truck and now comes standard with HoBao's Mach 28 engine. This car crushing beast features huge monster tyres that can handle almost any terrain while extra long shock absorbers help soak up bumps and jumps.

Open the box and the HoBao branded Futaba 2-channel radio is already pre-installed, tyres glued on rims, bodyshell finished and painted. A fuel bottle is also included. All that you have to do is add some AA cells for the radio and a plug and fuel for the engine and you are away, ready to rip!

Based on supersized indoor arena trucks, such as the legendary 'Big Foot and Grave Digger' The Pirate Sport Monster Truck shares similarities with its full size counterparts, using supersized wheels, realistic truck body, roll cage and lights.

* Pre-assembled
* 2-channel radio
* Mach Star 28 engine
* Tuned pipe
* Bearings
* Radio Box
* Chassis Braces
* Blue Anodised Chassis Parts
* Custom Bodyshells
* Bumper Bars

Recognised as the UK’s most popular 1/8th off road buggy the Hyper 7 RTR has received a new facelift to commemorate HoBao’s TQ at last years IFMAR World Championships.

The HoBao Hyper 7 TQ Sport RTR now features upgrades such as front and rear chassis torque rods, front universal driveshafts, twin brake discs, 3.5mm thick shock shafts and laydown airfilter. Of course all this is ontop of the factory pre-assembled chassis with HoBao branded Futaba 2-channel radio, Hyper 21 4-port engine, mounted wheels and tyres and the awesome finish of the pre-painted flame bodyshells.

* Fully assembled with HoBao branded Futaba 2-channel radio
* Hyper 21 4-port pull start engine
* Twin Brake discs
* Custom Pre-painted bodyshell
* Pre-glued tyres on Spilt spoke wheels
* Front and rear chassis braces
* 3-shoe clutch
* Laydown airfilter
* Hard anodised chassis with side skirts
* 3.5mm Shock shafts
* New gun metal anodising
* Rear anti-roll bar
* Front universal driveshafts
* Full range of racing options

Hyper .21 4-port Pull Start Engine