Radio Racers Cars - Electric
my image
HomeContact UsTerms & Conditions

spacer imagespacer image

Cars - Electric

Radio Racers Store |  Cars - Electric

Associated C4.1 Centro Conversion Kit ASC0001
C4.1 Conversion KitC4.1 Conversion KitC4.1 Conversion Kit
OUT OF STOCK

Associated C4.1 Centro Conversion Kit ASC0001

Quantity:

£169.99

Out of Stock






Based on the multiple World Championship winning Team Associated B4.1, the Centro converts the transmission to mid-motor and has been developed with the sole aim of continuing to beat the competition, particularly on higher grip tracks such as Astro-turf, grass and even indoor carpet and mixed surface.

Using an ultra slim black anodised chassis for saddle pack or ‘shorty’ Li-po cells, the C4.1 utilizes the race proven B4.1 suspension components and geometry to tame any track. The gearbox has four internal gears to maximise the mid-motor configuration, with the casing itself machined from delrin. The custom made rear hinge-pin mounts have the option of one or two degrees anti-squat.

With the parts included in the conversion you will have everything you’ll need (except for tuning weights) to make your B4.1 into the same car Neil Cragg, Paul Bradby and Tom Yardy took to the national podium.

The original Associated B4 can be converted too; it just needs the B4.1 diff outdrives (AS9852) and metric outdrive bearings (AS9832) along with the Centro conversion itself.

HPI Bullet ST Flux Monster Truck RTR 2.4GHz BRUSHLESS
Bullet ST Flux Stadium TruckBullet ST Flux Stadium TruckBullet ST Flux Stadium Truck
Bullet ST Flux Stadium TruckBullet ST Flux Stadium Truck 

HPI Bullet ST Flux Monster Truck RTR 2.4GHz BRUSHLESS

Quantity:

£310.00

In Stock






Introducing the refreshed HPI Bullet ST Flux, the ready-built off-road vehicle that's ideal for all off-road bashers and enthusiasts! Now featuring a waterproof receiver and battery compartment and waterproof servos, the Bullet ST Flux is truly a go-anywhere machine!

This Bullet is a 1/10th scale stadium racing truck fitted with a powerful 4WD drivetrain and a super-powerful HPI Flux Brushless System featuring waterproof electronics and Li-Po cutoff, so it can power through all sorts of terrain and fly over any obstacles! Now fitted with a versatile and comfortable HPI 2.4GHz radio system, it's easier than ever to control the speed of the Bullet!

The Bullet ST Flux is just one member of a family of HPI vehicles which are based around a durable 4WD shaft drivetrain, 2 shocks per wheel and double-deck aluminium chassis. The Bullet off-road trucks feature either the silent Flux brushless system or Nitro Star 3.0 engine, and are available in different off-road truck varieties. In short, you can get the precise flavour of off-road performance you want with the HPI Bullet!

Factory-assembled & pre-painted electric-powered 4WD Stadium Truck
2.4 GHz radio system for crystal-free, comfortable control
Waterproof receiver/battery box
Strong and powerful HPI Flux Shot brushless motor
Waterproof HPI Flux Reload v2 speedo with fan and 3S LiPo capability!
Forward/Brake/Reverse functionality for easy driving
Fully programmable speed controller with the #101280 2 in 1 Professional Program Card
Waterproof steering servo
Painted and detailed bodyshell ready to strut its stuff!
6061 aluminium chassis provides the ideal backbone
Tough bumpers combine with skid plates to protect all 4 corners
8 oil-filled shocks provide a plush ride
Extra-long suspension arms provide stability and balance
Proven racing design throughout
Steel turnbuckle links allow you to custom-tune the ride
Sealed shaft drivetrain is maintenance-free and super strong
Double-pad slipper clutch design for extra drivetrain protection
All-terrain tyres look fantastic on black chrome wheels
A smart metal washer prevents over-tightening of wheel nuts
Additional track-tuning options included in the kit!

Length: 417mm
Width: 336mm
Height: 160mm (Adjustable)
Wheelbase: 272mm
Track: 263mm
Drivetrain: Shaft 4WD

HPI Bullet MT Flux Monster Truck RTR 2.4 GHz BRUSHLESS
Bullet MT FluxBullet MT FluxBullet MT Flux
Bullet MT FluxBullet MT Flux 
OUT OF STOCK

HPI Bullet MT Flux Monster Truck RTR 2.4 GHz BRUSHLESS

Quantity:

£310.00

Out of Stock






Introducing the refreshed HPI Bullet MT Flux, the ready-built off-road vehicle that's ideal for all off-road bashers and enthusiasts! Now featuring a waterproof receiver and battery compartment and waterproof servos, the Bullet MT Flux is truly a go-anywhere machine!

This Bullet is a 1/10th scale monster racing truck fitted with a powerful 4WD drivetrain and a super-powerful HPI Flux Brushless System featuring waterproof electronics and Li-Po cutoff, so it can power through all sorts of terrain and fly over any obstacles! Now fitted with a versatile and comfortable HPI 2.4GHz radio system, it's easier than ever to control the speed of the Bullet!

The Bullet MT Flux is just one member of a family of HPI vehicles which are based around a durable 4WD shaft drivetrain, 2 shocks per wheel and double-deck aluminium chassis. The Bullet off-road trucks feature either the silent Flux brushless system or Nitro Star 3.0 engine, and are available in different off-road truck varieties. In short, you can get the precise flavour of off-road performance you want with the HPI Bullet!

Factory-assembled & pre-painted electric-powered 4WD Monster Truck
2.4 GHz radio system for crystal-free, comfortable control
Waterproof receiver/battery box
Strong and powerful HPI Flux Shot brushless motor
Waterproof HPI Flux Reload v2 speedo with fan and 3S LiPo capability!
Forward/Brake/Reverse functionality for easy driving
Fully programmable speed controller with the #101280 2 in 1 Professional Program Card
Waterproof steering servo
Painted and detailed bodyshell ready to strut its stuff!
6061 aluminium chassis provides the ideal backbone
Tough bumpers combine with skid plates to protect all 4 corners
8 oil-filled shocks provide a plush ride
Extra-long suspension arms provide stability and balance
Proven racing design throughout
Steel turnbuckle links allow you to custom-tune the ride
Sealed shaft drivetrain is maintenance-free and super strong
Double-pad slipper clutch design for extra drivetrain protection
All-terrain tyres look fantastic on black chrome wheels
A smart metal washer prevents over-tightening of wheel nuts
Additional track-tuning options included in the kit!

Length: 417mm
Width: 336mm
Height: 160mm (Adjustable)
Wheelbase: 272mm
Track: 263mm
Drivetrain: Shaft 4WD

HPI E-Firestorm 10T FLUX Truggy RTR 1/10th Scale 2.4GHz BRUSHLESS
Firestorm Flux 1/10th TruggyFirestorm Flux 1/10th TruggyFirestorm Flux 1/10th Truggy
Firestorm Flux 1/10th TruggyFirestorm Flux 1/10th Truggy 
OUT OF STOCK

HPI E-Firestorm 10T FLUX Truggy RTR 1/10th Scale 2.4GHz BRUSHLESS

Quantity:

£259.99

Out of Stock






The ready-to-run E-Firestorm Flux, HPI's first-ever brushless motor equipped 2WD 1/10th scale stadium truck, is now better than ever! We've taken the proven platform and added a 2.4GHz radio system, a more powerful ESC/motor combination with 3S LiPo capability, waterproof electronics, new Split 5 chrome wheels and two fresh new paint jobs. The updated E-Firestorm Flux lets you have loads of fun in wet conditions and has a top speed of over 80 km/h (50 mph) with on-command wheelies!

Flux Vektor 4800Kv brushless motor provides high performance, efficiency, long motor life, reduced maintenance
Flux Vapor waterproof ESC for smooth and efficient motor control
Composite main chassis is lightweight and durable
Suspension geometry and components from the Firestorm 10T
Nimble handling and easy to drive in all conditions
Many existing Firestorm option parts bolt directly on to maximize performance
Vertically adjustable front and rear camber links are easily adjustable to suit conditions and driving styles
Adjustable shock positions (3 upper and 2 lower) to maximize suspension performance
Adjustable wheelbase to tune the length of the truck to suit driving conditions
Adjustable rear toe and anti-squat for quick adjustment to fine tune handling
High quality thumbscrews on battery retainer for secure and tool-free battery access. Fits most Li-Po packs an 6-7 cell NiMh packs

Length: 425 mm
Front Width: 325 mm
Rear Width: 325 mm
Wheelbase: Adjustable

HPI E-Firestorm 10T Truggy RTR 2.4GHz (UK 3-Pin)
E-Firestorm Electric RTRE-Firestorm Electric RTRE-Firestorm Electric RTR
E-Firestorm Electric RTR  

HPI E-Firestorm 10T Truggy RTR 2.4GHz (UK 3-Pin)

Quantity:

£199.99

In Stock






The E-Firestorm 10T is already a popular, durable and quick truck, so how could HPI designers possibly make it better? By adding crystalless 2.4GHz radio gear to make it easy to drive with your friends and waterproof electronics that allow you to drive in really tough conditions! We didn't want to stop there, so we added a LiPo battery safety cut-off to the speedo, tossed in a powerful 8.4 volt battery pack and charger, plus AA batteries for the transmitter! To top things off we've upgraded the looks with stylish chrome-plated Split 5 wheels and a sweet all-new design for the bodyshell!

* Waterproof ESC for smooth and efficient motor control
* LiPo-safe battery voltage cut-off for using LiPo battery packs
* SF-10W waterproof steering servo
* Composite main chassis is lightweight and durable
* Suspension geometry and components from the Firestorm 10T
* Nimble handling and easy to drive in all conditions
* Many existing Firestorm option parts bolt directly on to maximize performance
* Vertically adjustable front and rear camber links are easily adjustable to suit conditions and driving styles
* Adjustable shock positions (3 upper and 2 lower) to maximize suspension performance
* Adjustable wheelbase to tune the length of the truck to suit driving conditions
* Adjustable rear toe and anti-squat for quick adjustment to fine tune handling
* High quality thumbscrews on battery retainer for secure and tool-free battery access. Fits most Li-Po packs an 6-7 cell NiMh packs
* Dual pad slipper clutch protects the drive train on hard landings
* Durable low-profile 2.6:1 ratio ALL METAL gear transmission is extremely durable and capable of handling very powerful motors
* Sealed planetary gear differential for nearly zero maintenance, maximum reliability and convenience of tuning differential action with heavy weight silicone oils
* Strong alloy steel dog bones for simplicity and durability

Length: 425mm
Front Width: 325mm
Rear Width: 325mm
Wheelbase: Adjustable

HPI Trophy Flux Truggy 1/8th Scale RTR 2.4Ghz
Trophy Truggy FluxTrophy Truggy FluxTrophy Truggy Flux
Trophy Truggy FluxTrophy Truggy Flux 

HPI Trophy Flux Truggy 1/8th Scale RTR 2.4Ghz

Quantity:

£430.00

In Stock






Get right into plug-and-go truggy action with the RTR Trophy Truggy Flux! This amazing off-road 4WD vehicle will thrill you with its jaw-dropping top speed, racing design and wild stunt action! Always a popular kit in its Nitro version, the Trophy Truggy has seen it all when it comes to burly stunts, and with the awesome power of a purpose-designed brushless system it is able to pull off the same tricks and as the Nitro version - but without the noise and fumes!

* Extra-strong webbed suspension arms are strong yet flexible to give you the best balance of driving feel and durability
* Cast aluminium steering knuckles for increased strength
* Extra-long shocks provide all the damping you'll ever need
* Race-tune the truck with plenty of shock adjustment positions
* Strong steel turnbuckles with chunky gripping points for easy adjustment of camber and front toe
* Multiple camber link locations offer several options for adjusting roll centre
* Front and rear sway bars fitted for superior race handling
* 17mm hex hubs resist stripping out and are hollow for light weight

Length: 580mm
Width: 405mm
Height: 180mm
Wheelbase: 365mm
Track Width Front/Rear (from centre of tyres): 365mm
Drivetrain: Full-Time Shaft 4WD

HPI Trophy Flux Buggy 1/8th Scale RTR 2.4Ghz
Trophy Buggy FluxTrophy Buggy FluxTrophy Buggy Flux
Trophy Buggy Flux  

HPI Trophy Flux Buggy 1/8th Scale RTR 2.4Ghz

Quantity:

£379.99

In Stock






The brushless-powered RTR Trophy Buggy Flux from HPI is the go-to kit for all-out fun and excitement combined with mind-bending top speeds! The Trophy Buggy has been a hugely popular 1/8th buggy, and now that it's fitted with the demonically fast Scream brushless motor and the 4S-capable Flux Rage speed controller, you can finally see what all the excitement is about with 1/8th electric buggies at a great price!

* Proven race geometry with championship-inspired design.
* Thick 6061 aluminium shock towers offer performance tuning and strong construction
* Extra-strong webbed suspension arms are strong yet flexible to give you the best balance of driving feel and durability
* Cast aluminium steering knuckles for increased strength
* Extra-long shocks provide all the damping you'll ever need
* Race-tune your buggy with plenty of shock adjustment positions
* Strong steel turnbuckles with chunky gripping points for easy adjustment of camber and front toe.
* Thick rear sway bar fitted for superior race handling
* 17mm hex hubs resist stripping out and are hollow for light weight

Length: 500mm
Width: 305mm
Height: 179mm
Wheelbase: 320mm (adjustable)
Track Width Front/Rear (from centre of tyres): 260mm
Tyres: 40mm wide x 110mm (outer diameter), 80mm inner diameter
Drivetrain: Full-Time 4WD

Associated B44.1 Factory Team 1/10th Scale Buggy Kit
B44.1 Factory Team BuggyB44.1 Factory Team BuggyB44.1 Factory Team Buggy
B44.1 Factory Team Buggy  
OUT OF STOCK

Associated B44.1 Factory Team 1/10th Scale Buggy Kit

Quantity:

£295.00

Out of Stock






The RC10B44.1 Factory Team kit is the next generation in a long line of race-winning 1:10 scale 4WD electric powered buggies. The B44 project came to life as a cooperative effort between Team Associated and JConcepts’ Jason Ruona and Brad Reelfs. The partnership was proven at the highest level of competition with Team Associated’s Ryan Cavalieri winning the 2005 I.F.M.A.R. World Championships in Italy with the BJ4 World’s Edition. Since then, the production B44 Factory Team has continued on to win with three R.O.A.R.
National titles, as well as sweep the podium at the 2007 I.F.M.A.R. World Championship in Japan placing 1st, 2nd and 3rd.

* Revised carbon-fiber LiPo-specific chassis provides increased ground clearance
* New Heavy Duty 3.5mm thick carbon-fiber front shock tower
* Factory Team 0° aluminum rear hubs with oversized outer bearing
Ball differentials with lightweight outdrives
* Factory Team V2 hard-anodized threaded shock bodies with bleed-screw caps
* V2 slipper assembly with high-rate spring for more consistent slipper clutch adjustments
* Factory Team blue aluminum cam motor mount set
* JConcepts Punisher body with protective chassis undertray included
* CVA joints with pin retainer clips
* Pro-Line M3 Holeshot 2.0 tyres, front and rear
* Carbon-fiber battery straps with blue aluminum thumb screws
* Blue titanium turnbuckles
* Complete set of precision ball bearings
* Factory Team blue aluminum servo mounts, shock bushings, shock pivot balls, wheel spacers, and much more!

* Power: Electric
* Length: 377mm
* Width: 250mm
* Weight: 1715g
* Wheelbase: 276mm
* Internal Gear Ratio: 2.6:1
* Drive: 4WD

Caster Racing SK10 RTR 4WD RTR Electric Buggy
Caster SK10 1/10th Scale RTR BuggyCaster SK10 1/10th Scale RTR BuggyCaster SK10 1/10th Scale RTR Buggy

Caster Racing SK10 RTR 4WD RTR Electric Buggy

Quantity:

£130.00

In Stock






New from Caster Racing is the S10B Buggy range, offering stunning value and race developed geometry.

The S10B RTR is the entry level in the range but offers an easy up grade path to the S10B-PRO.

Despite being "entry level" the S10B-RTR offers features only ever seen on much more costly vehicles inmcluding alloy threaded shocks (no other car in this class comes with these as standard) Fully ballraced, adjustable wheel base and a whole host of extra features.

Caster have developed the S10 range to cover all those who want to run 1/10th buggy from entry level to high end race.

Width: 247mm front, 250mm rear
Wheelbase: 280mm ? 2mm (adjustable)

1. Front CVD Drive
2. Big Bore Shock System with screw adjustments.
3. Full Ball Bearing through out the car.
4. Ball Diffs.
5. Adjustable Slipper Clutch.
6. Full adjustable turnbuckle.
7. Front & Rear Toe in adjustable system.
8. Racing Hinge Pin for front and Rear.
9. 3.5mm shock Shaft.
10. Racing Performance design.
11. Full Hex Racing quality Screw.
12. Alum Hex Wheel adaptor.
13. Alum Shock body and Cap.
14. Fully upgradable to 90% alum parts.
15. Spring Servo Safer System.
16. Low Profile Preprinted Body.
17. Low Balance CG design.
18. Fully High Quality racing Drive shaft.
19. 3kg servo is included
20. 540-30000 RPM Motor.
21. Brushed 320A ESC
22. 27 Mhz AM radio
23. High Quality Racing 1800 NIMH battery.

FTX Siege 1/10th Brushless RTR 2WD Electric Truggy
Siege Brushless TruggySiege Brushless TruggySiege Brushless Truggy
Siege Brushless TruggySiege Brushless TruggySiege Brushless Truggy

FTX Siege 1/10th Brushless RTR 2WD Electric Truggy

Quantity:

£194.99

In Stock






Enjoy the speed and simplicity of 2wd off road truck design with the new FTX Edge 2wd 1/10th truggy. Based around tried and tested 2wd styling as used by leading manufacturers, the Edge is the perfect platform to enter radio control off road fun or racing.

It’s simple fit and forget design is highlighted with
the bottom loading battery compartment and rear mounted switch enabling you to use and change batteries without necessarily removing the body shell.

* Ready to run
* Etronix EX2 Sport 2.4ghz radio
* Etronix Photon Plus 2-3S 90A sensorless/sensored brushless speed control
* Etronix 3930KV sensorless brushless motor
* Voltz 2500mah 7.4v 25c LiPo Hardcased battery
* Voltz Vault Lipo charge sack
* Etronix Pocket Balance charger
* Race designed low profile pre-painted bodyshell
* Moulded tub chassis with modular front & rear sections
* Bottom loading battery hatch – no need to remove body
* Rear mounted on/off switch – no need to remove body
* Three gear gearbox with adjustable slipper clutch
* Geared differential
* Adjustable Turnbuckles
* Oil filled shock absorbers
* Captured hinge pins
* Adjustable roll centres
* Option parts available

* Length: 440mm
* Width: 325mm
* Height: 160mm
* Wheelbase: 285mm
* Gear Ratio: 1:9.6
* Weight: 1.195kg

FTX Siege 1/10th Brushed RTR 2WD Electric Truggy
Siege Brushed TruggySiege Brushed TruggySiege Brushed Truggy
Siege Brushed TruggySiege Brushed Truggy 
OUT OF STOCK

FTX Siege 1/10th Brushed RTR 2WD Electric Truggy

Quantity:

£109.99

Out of Stock






Enjoy the speed and simplicity of 2wd off road truck design with the new FTX Siege 2wd 1/10th truggy. Based around tried and tested 2wd styling as used by leading manufacturers, the Siege is the perfect platform to enter radio control off road fun or racing.

It’s simple fit and forget design is highlighted with
the bottom loading battery compartment and rear mounted
switch enabling you to use and change batteries without
neccessarily removing the bodyshell.

* Ready to run
* 27mhz radio
* Etronix Probe Plus 100A 7.2v-7.4v Ni-Mh/Lipo electronic speed control
* 540-size 20,000 rpm brushed motor
* Voltz 1800mah 7.2v Ni-Mh battery
* Etronix wall charger
* Race designed low profile pre-painted bodyshell
* Moulded tub chassis with modular front & rear sections
* Bottom loading battery hatch – no need to remove body
* Rear mounted on/off switch – no need to remove body
* Three gear gearbox with adjustable slipper clutch
* Geared differential
* Adjustable Turnbuckles
* Oil filled shock absorbers
* Captured hinge pins
* Adjustable roll centres
* Option parts available

* Length: 440mm
* Width: 325mm
* Height: 160mm
* Wheelbase: 285mm
* Gear Ratio: 1:9.6
* Weight: 1.195kg

FTX Edge 1/10th Brushless RTR 2WD Electric Buggy
Edge Brushless BuggyEdge Brushless BuggyEdge Brushless Buggy
Edge Brushless Buggy  
OUT OF STOCK

FTX Edge 1/10th Brushless RTR 2WD Electric Buggy

Quantity:

£190.00

Out of Stock






Enjoy the speed and simplicity of 2wd off road design with the new FTX Edge 2wd 1/10th buggy. Based around tried and tested 2wd styling as used by leading manufacturers, the Edge is the perfect platform to enter radio control off road fun or racing.

It’s simple fit and forget design is highlighted with
the bottom loading battery compartment and rear mounted switch enabling you to use and change batteries without necessarily removing the bodyshell.

* Ready to run
* Etronix EX2 Sport 2.4ghz radio
* Etronix Photon Plus 2-3S 90A sensorless/sensored
* brushless speed control
* Etronix 3930KV sensorless brushless motor
* Voltz 2500mah 7.4v 25c LiPo Hardcased battery
* Voltz Vault Lipo charge sack
* Etronix Pocket Balance charger
* Race designed low profile pre-painted bodyshell
* Moulded tub chassis with modular front & rear sections
* Bottom loading battery hatch – no need to remove body
* Rear mounted on/off switch – no need to remove body
* Three gear gearbox with adjustable slipper clutch
* Geared differential
* Adjustable Turnbuckles
* Oil filled shock absorbers
* Captured hinge pins
* Adjustable roll centres
* Option parts available

* Length: 405mm
* Width: 250mm
* Height: 135mm
* Wheelbase: 265mm
* Gear Ration: 1:9.6
* Weight: 1.195kg

FTX Edge 1/10th Brushed RTR 2WD Electric Buggy
Edge Brushed BuggyEdge Brushed BuggyEdge Brushed Buggy
OUT OF STOCK

FTX Edge 1/10th Brushed RTR 2WD Electric Buggy

Quantity:

£100.00

Out of Stock






Enjoy the speed and simplicity of 2wd off road design with the new FTX Edge 2wd 1/10th buggy. Based around tried and tested 2wd styling as used by leading manufacturers, the Edge is the perfect platform to enter radio control off road fun or racing.

It’s simple fit and forget design is highlighted with
the bottom loading battery compartment and rear mounted switch enabling you to use and change batteries without necessarily removing the bodyshell.

* Ready to run
* 27mhz radio
* Etronix Probe Plus 100A 7.2v-7.4v Ni-Mh/Lipo electronic speed control
* 540-size 20,000 rpm brushed motor
* Voltz 1800mah 7.2v Ni-Mh battery
* Etronix wall charger
* Race designed low profile
* Race designed low profile pre-painted bodyshell
* Moulded tub chassis with modular front & rear sections
* Bottom loading battery hatch – no need to remove body
* Rear mounted on/off switch – no need to remove body
* Three gear gearbox with adjustable slipper clutch
* Geared differential
* Adjustable Turnbuckles
* Oil filled shock absorbers
* Captured hinge pins
* Adjustable roll centres
* Option parts available

* Length: 405mm
* Width: 250mm
* Height: 135mm
* Wheelbase: 265mm
* Gear Ration: 1:9.6
* Weight: 1.195kg

FTX Carnage Brushless 1/10th Scale Truck RTR FTX5543
Carnage Brushless TruckCarnage Brushless TruckCarnage Brushless Truck
Carnage Brushless Truck  
OUT OF STOCK

FTX Carnage Brushless 1/10th Scale Truck RTR FTX5543

Quantity:

£209.99

Out of Stock






The Carnage Brushed Edition comes with everything you need to be up and running all in the box (just add AA’s). For those with a limited budget the Vantage Brushed represents fantastic value and includes a Voltz 1800mah NiMh battery and charger, factory fitted electronic speed control, power 550 motor and 27mhz 2-channel radio system. To help you on you way FTX have even thrown in a FREE extra pair of TX/RX crystals!

The 4wd shaft drivetrain features metal diff gears and front universal driveshafts, while an integrated slipper helps protect the drive from possible damage. With adjustable turnbuckles all round and large bore oil filled shock absorbers the Carnage Brushed is raring to go at a truly amazing price.

* Ready to run with 27mhz radio installed & extra set of crystals FREE
* 300A rated brushed speed control
* 550 brushed motor
* Voltz 1800mAh 7.2v NiMH battery
* Wall charger for battery
* Race designed low profile pre-painted bodyshell
* Moulded tub chassis
* 4wd shaft drive with slipper system
* Unique gearbox design for low CG
* Lightweight high impact arms
* Big bore oil filled adjustable shocks
* Gearbox metal crown & pinion gear
* Front universal driveshaft
* Adjustable wheelbase
* Adjustable turnbuckles
* Fully adjustable suspension including, droop, camber, toe-in, wheelbase etc
* Slipper for drivetrain damage protection
* Chassis accepts NiMh or LiPo battery
* 3kg steering servo with heatsink body
* Wide range of option parts available

* Length: 415mm
* Width: 328mm
* Heigh: 156mm
* Wheelbase: 290/295mm
* Tyre: ø 120 x 60mm
* Gear Ratio: 11.2:1

FTX Carnage Brushed 1/10th Scale Truck RTR FTX 5537 (5055323944468)
Carnage Brushless TruggyCarnage Brushless TruggyCarnage Brushless Truggy
Carnage Brushless TruggyFTX Carnage Brushed 1/10th Scale Truck RTR FTX 5537 (5055323944468) - view 5 

FTX Carnage Brushed 1/10th Scale Truck RTR FTX 5537 (5055323944468)

Quantity:

£115.00

In Stock






Get ready for some serious off road buggy action with the Brushless Edition FTX Vantage. Taking RTR styling to a competition level, the Vantage brushless boasts some amazing features for the ultimate ‘Ready-to-Run' experience.

Etronix provide crystal free 2.4ghz control with the EX2 Sport radio. In addition the Etronix Photon sensorless brushless system is installed to provide some low maintenance, high performance speed and power.

Instead of using a NiMh battery, FTX decided to include a Voltz hardcase LiPo battery to get the very best from the Photon system, but with safety
in-mind included is a balance charger and LiPo charge sack. Infact all you need to add is AA batteries for the transmitter.

* Ready to run
* Etronix EX2 Sport 2.4ghz radio
* Etronix 60Amp Photon sensorless brushless speed control
* Etronix 3650KV sensorless brushless motor
* Etronix Pocket Balance charger
* Voltz 2700mah 7.4v 25c LiPo Hard cased battery
* Voltz LiPo charge sack
* Race designed low profile pre-painted
bodyshell
* Moulded tub chassis
* 4wd shaft drive with slipper system
* Unique gearbox design for low CG
* Lightweight high impact arms
Big bore oil filled adjustable shocks
* Gearbox metal crown & pinion gear
* Front universal driveshafts
* Adjustable wheelbase
* Adjustable turnbuckles
* Fully adjustable suspension including,droop, camber, toe-in, wheelbase etc
* Slipper for drivetrain damage protection
* Chassis accepts NiMh or LiPo battery
* 3kg steering servo with heatsink
body
* Wide range of option parts available

* Length: 415mm
* Width: 255mm
* Height: 142mm
* Wheelbase: 275/280mm
* Tyre: ø 88 x 39mm (rear) ø 88 x 34mm )front)
* Gear Ratio: 8.3:1
* Weight: 1650g

FTX Vantage Brushless 1/10th Scale Buggy RTR FTX 5532 (5055323944390)
Vantage Brushless BuggyVantage Brushless BuggyVantage Brushless Buggy
Vantage Brushless BuggyVantage Brushless Buggy 
OUT OF STOCK

FTX Vantage Brushless 1/10th Scale Buggy RTR FTX 5532 (5055323944390)

Quantity:

£199.99

Out of Stock






Get ready for some serious off road buggy action with the Brushless Edition FTX Vantage. Taking RTR styling to a competition level, the Vantage brushless boasts some amazing features for the ultimate ‘Ready-to-Run' experience.

Etronix provide crystal free 2.4ghz control with the EX2 Sport radio. In addition the Etronix Photon sensorless brushless system is installed to provide some low maintenance, high performance speed and power.

Instead of using a NiMh battery, FTX decided to include a Voltz hardcase LiPo battery to get the very best from the Photon system, but with safety
in-mind included is a balance charger and LiPo charge sack. Infact all you need to add is AA batteries for the transmitter.

* Ready to run
* Etronix EX2 Sport 2.4ghz radio
* Etronix 60Amp Photon sensorless brushless speed control
* Etronix 3650KV sensorless brushless motor
* Etronix Pocket Balance charger
* Voltz 2700mah 7.4v 25c LiPo Hard cased battery
* Voltz LiPo charge sack
* Race designed low profile pre-painted
bodyshell
* Moulded tub chassis
* 4wd shaft drive with slipper system
* Unique gearbox design for low CG
* Lightweight high impact arms
Big bore oil filled adjustable shocks
* Gearbox metal crown & pinion gear
* Front universal driveshafts
* Adjustable wheelbase
* Adjustable turnbuckles
* Fully adjustable suspension including,droop, camber, toe-in, wheelbase etc
* Slipper for drivetrain damage protection
* Chassis accepts NiMh or LiPo battery
* 3kg steering servo with heatsink
body
* Wide range of option parts available

* Length: 415mm
* Width: 255mm
* Height: 142mm
* Wheelbase: 275/280mm
* Tyre: ø 88 x 39mm (rear) ø 88 x 34mm )front)
* Gear Ratio: 8.3:1
* Weight: 1650g


FTX Vantage Brushed 1/10th Scale Buggy RTR FTX 5527 (5055323944383)
Vantage Brushed BuggyVantage Brushed BuggyVantage Brushed Buggy
Vantage Brushed Buggy  

FTX Vantage Brushed 1/10th Scale Buggy RTR FTX 5527 (5055323944383)

Quantity:

£104.99

In Stock






Race inspired styling at an entry level price. The FTX Vantage Brushed Edition comes with everything you need to be up and running all in the box (just add AA’s).

For those with a limited budget the Vantage Brushed represents antastic value and includes a Voltz 1800mah NiMh battery and charger, factory fitted electronic speed control, power 550 motor and 27mhz 2-channel radio system.

To help you on you way FTX have even thrown in a FREE extra pair of TX/RX crystals!

* Ready to run with 27mhz radio installed & extra set of crystals FREE
* 300A rated brushed speed control
* 550 brushed motor
* Voltz 1800mAh 7.2v NiMH battery
* Wall charger for battery
* Race designed low profi le pre-painted bodyshell
* Moulded tub chassis
* 4wd shaft drive with slipper system
* Unique gearbox design for low CG
* Lightweight high impact arms
* Big bore oil fi lled adjustable shocks
* Gearbox metal crown & pinion gear
* Front universal driveshafts
* Adjustable wheelbase
* Adjustable turnbuckles
* Fully adjustable suspension including, droop, camber, toe-in, wheelbase etc
* Slipper for drivetrain damage protection
* Chassis accepts NiMh or LiPo battery
* 3kg steering servo with heatsink body
* Wide range of option parts available

* Length: 415mm
* Width: 255mm
* Heigh: 142mm
* Wheelbase: 275/280mm
* Tyre: ø 88 x 39mm (rear) ø 88 x 34mm )front)
* Gear Ratio: 8.3:1
* Weight: 1710g

Team Durango DEX410R Buggy Kit TD102003 (5052126002449)
OUT OF STOCK

Team Durango DEX410R Buggy Kit TD102003 (5052126002449)

Quantity:

£239.99

Out of Stock






The DEX410R shares the same Team Durango DNA, performance and innovation as the World Championship winning DEX410, but with a more 'regular' specification. If you want true world-class engineering and race winning performance, at a price a new R/C racer can enjoy, you have found it in the Team Durango DEX410R!

Associated B4.1 Brushless RTR Buggy AS9039 (784695090392)
Associated B4.1 Brushless RTR Buggy AS9039 (784695090392) - view 1Associated B4.1 Brushless RTR Buggy AS9039 (784695090392) - view 2Associated B4.1 Brushless RTR Buggy AS9039 (784695090392) - view 3
OUT OF STOCK

Associated B4.1 Brushless RTR Buggy AS9039 (784695090392)

Quantity:

£215.99

Out of Stock






Team Associated’s RC10B4 has been proven as a world-class competition buggy with four consecutive IFMAR Worlds Championships and five ROAR National Championships. Equally important are the countless club and regional events that the B4 continues to win.
Designed by the winningest name in R/C, Team Associated now brings you this level of high-performance in the new brushless RC10B4.1 RTR. Fully assembled and sharing many of the same components as the RC10B4 Team kit, the brushless RC10B4.1 RTR incorporates upgraded features like a totally new 2.4GHz 3-Channel radio system and SHV1504 MG metal gear steering servo. A Reedy 3300kV brushless motor supplies the power, while the XP SC450-BL electronic speed control with LiPo cutoff provides smooth throttle control. A sealed gear differential improves reliability and allows fine tuning for different surface conditions.
Additional upgrades can be made to your brushless RC10B4.1 using a full line of Factory Team B4 hop-ups, as well as Reedy and LRP performance parts. Drive a genuine Team Associated brushless RC10B4.1 RTR into the winner’s circle today, or chances are you’ll be chasing one!

* Built on the 4-time World Champion and 5-time National Champion RC10B4 platform
* XP3-SS 2.4 GHz 3-channel radio system with SHV1504 MG metal gear servo
* XP SC450-BL Brushless electronic speed control with LiPo cutoff, forward and reverse with reverse lock out
* Reedy 3300kV brushless motor
* 2.6:1 ratio gearbox with sealed gear differential, dual-sided adjustable slipper clutch, and rubber sealed ball bearings
* Molded composite low-CG chassis with set-screw antenna tube lock
* Blue aluminum shock bodies with molded pre-load clips
* Battery strap with twist-lock thumb knobs
* Rugged steel turnbuckles for adjustable camber and front toe-in
* Angled bellcrank “co-planar” steering with built in servo saver
* Vertical ball ends for roll center adjustments, front and rear
* Factory finished Interceptor 2.0 polycarbonate body
* Pre-mounted tires on white dish wheels
Spec Check:
* Scale: 1:10
* Power: Electric
* Type: Off Road
* Length: 377mm
* WidthL: 250mm
* Weight: 1530g
* Wheelbase: 273mm
* Internal Gear Ratio: 2.6:1
* Drive: 2WD
Items Needed:
* 6-cell battery pack, NiMH or LiPo (Deans Connector)
* Battery charger (peak detection charger recommended)
* AA batteries for transmitter

Stinger RTR EB-1 1/10th Scale Buggy - Gold/Blue Step-Up
Stinger RTR EB-1 Buggy - Gold/BlueStinger RTR EB-1 Buggy - Gold/BlueStinger RTR EB-1 Buggy - Gold/Blue
Stinger RTR EB-1 Buggy - Gold/Blue  

Stinger RTR EB-1 1/10th Scale Buggy - Gold/Blue Step-Up

Quantity:

£89.99

In Stock







Considering trying your hand at RC off road? Then it could well be time to 'step up' to the mark with the exciting new range of models called Stinger from STEP UP.

Step Up have developed a range specifically aimed at the entry level and cost conscious enthusiast. First up is the Stinger EB-1 1/10th Buggy.


Want to race you Stinger? Well Step Up intends to release a wide range of options that will ultimately allow you to bring your ride up to a whole new level of performance as you progress with your own abilities.



* 2 Channel pre-installed radio
* Compact Electronic Speed Controller comes as standard
* 540 Motor
* Strong and sturdy suspension mouldings
* Moulded tub modular chassis design
* Oil filled shock absorbers
* Pre-painted bodyshell



* Wheelbase: 280mm
* Width: 250mm
* Height: 155mm
* Length: 391mm
* Scale: 1/10th




Radio Racers Store |  Cars - Electric

Powered By WorldPay
Visa payments supported by WorldPayVisa/Electron payments supported by WorldPayMastercard payments supported by WorldPayMaestro payments supported by WorldPayJCBSolo payments supported by WorldPay
Radio Racers on Facebook